Vol. 10 No. 3 (2022): Business & Management Studies: An International Journal
Articles

Evaluation of the obstacles and solution proposals of the reverse logistics applications using multi-criteria decision-making methods

PDF (Turkish)
  • Zeynep ÖZGÜNER,
  • Mert ÖZGÜNER
Zeynep ÖZGÜNER
Assist. Prof. Dr., Hasan Kalyoncu University, Gaziantep, Turkiye
Bio
Mert ÖZGÜNER
Assist. Prof. Dr., Adiyaman University, Adıyaman, Turkiye
Bio

Published 2022-09-25

Keywords

  • Tersine lojistik, DEMATEL, SWARA
  • Reverse logistics, DEMATEL, SWARA

How to Cite

Evaluation of the obstacles and solution proposals of the reverse logistics applications using multi-criteria decision-making methods. (2022). Business & Management Studies: An International Journal, 10(3), 895-912. https://doi.org/10.15295/bmij.v10i3.2087

Copyright (c) 2022 Zeynep ÖZGÜNER- Mert ÖZGÜNER

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

Evaluation of the obstacles and solution proposals of the reverse logistics applications using multi-criteria decision-making methods. (2022). Business & Management Studies: An International Journal, 10(3), 895-912. https://doi.org/10.15295/bmij.v10i3.2087

Abstract

Developments such as increasing environmental awareness, the rise in the demand for green products, and the increasing prevalence of sustainable production have forced businesses to develop various strategies to follow green developments, attach importance to efficient resource use, and minimize the waste arising from production. Reverse logistics applications are one of the most important of these strategies. However, it is possible to say that with the increasing complexity recently, some obstacles have emerged that make reverse logistics difficult and cause failure. At this point, businesses must develop strategies and solutions to remove these obstacles to increase efficiency in reverse logistics applications. This study aims to determine the obstacles faced by enterprises from different sectors in the Turkish manufacturing industry in reverse logistics applications according to their importance levels and to evaluate the solutions that can remove these obstacles. For this purpose, 12 obstacles determined from a comprehensive literature search were analyzed with the DEMATEL method. Then, the SWARA method determined and analysed eight solution criteria representing the proposals that will remove these obstacles. The findings show that the biggest obstacle is "Legal problems and inadequacy of supportive policies", and the most important solution proposal is "Integrating reverse logistics practices into the organization's vision and mission". As can be seen, the need for legal measures of governments is evident at the point of success of reverse logistics applications. In addition, businesses need to adopt reverse logistics practices and take the necessary steps.

PDF (Turkish)

References

  1. Abdulrahman, M.D., Gunasekaran, A., & Subramanian, N. (2014). Critical barriers in implementing reverse logistics in the Chinese manufacturing sectors. International Journal of Production Economics, 147, 460-471.
  2. Ali, S.M., Arafin, A., Moktadir, A., Rahman, T., & Zahan, N. (2017). Barriers to reverse logistics in the computer supply chain using ınterpretive structural model. Global Journal of Flexible Systems Management, 19, 53–68.
  3. Bappy, M., Ali, S., Kabir, G., & Paul, S.K. (2019). Supply chain sustainability assessment with Dempster-Shafer evidence theory: Implications in cleaner production. Journal of Cleaner Production, 237, 117-129.
  4. Belhadi, A., Touriki, F.E., & El Fezazi, S. (2017). Prioritizing the solutions of lean implementation in SMEs to overcome its barriers: an integrated fuzzy AHP-TOPSIS approach. Journal Manufacturing Technology Management, 28(8), 1115-1139.
  5. Bernon, M., Upperton, J., Bastl, M., & Cullen, J. (2013). An exploration of supply chain integration in the retail product returns process. International Journal of Physical Distribution & Logistics Management, 43(7), 586-608.
  6. Bowen, F.E., Bansal, P., & Slawinski, N. (2018). Scale matters: the scale of environmental issues in corporate collective actions. Strategic Management Journal, 39(5), 1411-1436.
  7. Candan, G. (2018). İlaç sektöründe başarılı tersine lojistik uygulamaları için faktörlerin değerlendirilmesi: bulanık mantık temelli yaklaşım. İşletme Araştırmaları Dergisi, 10(3), 592-605.
  8. Da Silva, F.J.G., & Gouveia, R.M. (2020). Drivers and barriers to cleaner production. Cleaner Production, Springer International Publishing, 375-399.
  9. de Brito, M.P., & Dekker, R. (2004). A framework for reverse logistics. In Reverse Logistics; Springer: Berlin/Heidelberg, Germany.
  10. Dutta, P., Talaulikar, S., Xavier, V., & Kapoor, S. (2021). Fostering reverse logistics in India by prominent barrier identification and strategy implementation to promote circular economy. Journal of Cleaner Production, 294, 126241.
  11. Duval, A., Fontela, E., & Gabus, A. (1974). Dematel report, cross-ımpact: a handbook on concepts and applications innovative, Methods: Batelle Geneva Research Center.
  12. Eyüboğlu, G., & Bastı, M. (2017). Tersine lojistikte karşılaşılan sorunlar ve çözüm önerileri: Türk gıda sektörü örneği. İstanbul Üniversitesi Sosyal Bilimler Dergisi, 2017/1.
  13. Gabus, A., & Fontela, E. (1972). World problems an invitation to further thought within the framework of DEMATEL. Battelle Geneva Research Centre, Switzerland, Geneva.
  14. González-Torre, P., Alvarez, M., Sarkis, J., & Adenso-Díaz, B. (2010). Barriers to the implementation of environmentally oriented reverse logistics: evidence from the automotive industry sector. Biritish Journal of Management, 21(4), 889-904.
  15. Govindan, K., & Bouzan, M. (2018). From a literature review to a multi-perspective framework for reverse logistics barriers and drivers. Journal of Cleaner Production, 187, 318-337.
  16. Gunasekaran, A., & Spalanzani, A. (2011). Sustainability of manufacturing and services: investigations for research and applications. International Journal of Production Econ, 140, 35-47.
  17. Ilgin, M.A., & Gupta, S.M. (2010). Environmentally conscious manufacturing and product recovery (ECMPRO): A review of the state of the art. Journal of Environmental Management, 91(3), 563-591.
  18. Keršulienė, V., Zavadskas, E.K., & Turskis, Z. (2010). Selection of rational dispute resolution method by applying new step-wise weight assessment ratio analysis (SWARA). Journal of Business Economics and Management, 11, 243-258.
  19. Kumar, A., & Dixit, G. (2018). Evaluating critical barriers to implementation of WEEE management using DEMATEL approach. Resources, Conservation and Recycling, 131, 101-121.
  20. Kumar, A., & Dash, M.K. (2016). Using DEMATEL to construct influential network relation map of consumer decision-making in e-marketplace. International Journal of Business Information Systems, 21(1), 48-72.
  21. Lamba, D., Yadav, D.K., Barve, A., & Panda, G. (2019). Prioritising barriers in reverse logistics of E-commerce supply chain using fuzzy-analytic hierarchy process. Electronic Commerce Resaerch, 1-23.
  22. Lau, K.H., & Wang, Y. (2009). Reverse logistics in the electronic industry of China: a case study. Supply Chain Managemant, 14(6), 447-465.
  23. Maghsoodi, A.I., Maghsoodi, A.I., Poursoltan, P., Antucheviciene, J., & Turskis Z. (2019). Dam construction material selection by implementing the integrated SWARA–CODAS approach with target-based attributes. Archives of Civil and Mechanical Engineering, 19(4), 1194-1210.
  24. Malviya, R.K., & Kant, R. (2017). Modeling the enablers of green supply chain management: an integrated ISM–fuzzy MICMAC approach. Benchmarking International Journal, 24(2), 536-568.
  25. Mangla, S.K., Govindan, K., & Luthra, S. (2016). Critical success factors for reverse logistics in Indian industries: A structural model. Journal of Cleaner Production, 129, 608–621.
  26. Maqbool, A., Khan, S., Haleem, A., & Khan, M.I. (2020). Investigation of drivers towards adoption of circular economy: a DEMATEL approach, H. Kumar, P. Jain (Eds.), Recent advances in mechanical engineering. Lecture notes in mechanical engineering, Springer, Singapore.
  27. Mardani, A., Nilashi, M., Zakuan, N., Loganathan, N., Soheilirad, S., Saman, M.Z.M., & Ibrahim, O. (2017). A systematic review and meta-Analysis of SWARA and WASPAS methods: theory and applications with recent fuzzy developments. Applied Soft Computing, 57, 265-292.
  28. Moktadir, M.A., Rahman, T., Ali, S.M., Nahar, N., & Paul, S.K. (2019). Examining barriers to reverse logistics practices in the leather footwear industry. Annals of Operation Resaerch, 1-32.
  29. Munny, A.A., Ali, S.M., Kabir, G., Moktadir, M.A., Rahman, T., & Mahtab, Z. (2019). Enablers of social sustainability in the supply chain: an example of footwear industry from an emerging economy. Sustainable Production and Consumption, 20, 230-242.
  30. Prajapati, H., Kant, R., & Shankar, R. (2019). Prioritizing the solutions of reverse logistics implementation to mitigate its barriers: A hybrid modified SWARA and WASPAS approach. Journal of Cleaner Production, 240, 118219.
  31. Prakash, C., & Barua, M.K. (2015). Integration of AHP-TOPSIS method for prioritizing the solutions of reverse logistics adoption to overcome its barriers under fuzzy environment. Journal of Manufacturing. Systems, 37, 599-615.
  32. Pumpinyo, S., & Nitivattananon, V. (2014). Investigation of barriers and factors affecting the reverse logistics of waste management practice: a case study in Thailand. Sustainability, 6, 7048–7062.
  33. Rameezdeen, R., Chileshe, N., Hosseini, M.R., & Lehmann, S. (2016). A qualitative examination of major barriers in implementation of reverse logistics within the South Australian construction sector. International Journal of Constr. Management, 16, 185–196.
  34. Ravi, V., & Shankar, R. (2005). Analysis of interactions among the barriers of reverse logistics. Technology Forecast Soc. Change, 72, 1011-1029.
  35. Ravi, V., & Shankar, R. (2017). An ISM-based approach analyzing interactions among variables of reverse logistics in automobile industries. Journal of Modelling in Management, 12(1), 36-52.
  36. Sarkis, J., Gonzalez-Torre, P., & Adenso-Diaz, B. (2010). Stakeholder pressure and the adoption of environmental practices: the mediating effect of training. Journal of Opereration Management, 28(2), 163-176.
  37. Sehnem, S., Vazquez-Brust, D., Pereira, S.C.F., & Campos, L.M. (2019). Circular economy: benefits, impacts and overlapping. Supply Chain Management.: International Journal, 24(6), 784-804.
  38. Shaik, M.N., & Abdul-Kader, W. (2018). A hybrid multiple criteria decision making approach for measuring comprehensive performance of reverse logistics enterprises. Computers & Industrial Engineering, 123, 9-25.
  39. Sirisawat, P., & Kiatcharoenpol, T. (2018). Fuzzy AHP-TOPSIS approaches to prioritizing solutions for reverse logistics barriers. Computers & Industrial Engineering, 117, 303–318.
  40. Sumrit, D., & Anuntavoranich, P. (2013). Using DEMATEL method to analyze the causal relations on technological innovation capability evaluation factors in Thai technology-based firms. International Transformation Journal of Eng., Management Appl. Science Technology, 4(2), 81-103.
  41. Tavana, M., Zareinejad, M., Di Caprio, D., & Kaviani, M.A. (2016). An integrated intuitionistic fuzzy AHP and SWOT method for outsourcing reverse logistics. Applied Soft Computing, 40, 544-557.
  42. Tzeng, G., Chiang, C., & Li, C. (2007). Evaluating intertwined effects in e-learning programs: a novel hybrid MCDM model based on factor analysis and DEMATEL. Expert systems with Applications, 32, 1028-1044.
  43. Vinodh, S., Prasanna, M., & Prakash, N.H. (2014). Integrated Fuzzy AHP–TOPSIS for selecting the best plastic recycling method: A case study. Applied Mathematical Modelling, 38, 4662–4672.
  44. Waqas, M., Dong, Q.L., Ahmad, N., Zhu, Y., & Nadeem, M. (2018). Critical Barriers to Implementation of Reverse Logistics in the Manufacturing Industry: A Case Study of a Developing Country. Sustainability, 10, 4202.
  45. Yusuf, I., & Raouf, A. (2013). Reverse logistics: an empirical study for operational framework. Proceedings of the Pakistan Academy of Sciences, 50(3), 201-210.
  46. Zolfani, S.H., & Saparauskas, J. (2013). New application of SWARA Method in prioritizing sustainability assessment indicators of energy system. Engineering Economics, 24(5), 408-414.
  47. Zolfani, S.H., Salimi, J., Maknoon, R., & Kildienė, S. (2015). Technology foresight about R&D projects selection: application of SWARA method at the policy making level. Engineering Economics, 26(5), 571-580.

Similar Articles

You may also start an advanced similarity search for this article.